|
深圳市飙发科技有限公司 
| 联系人：龙小姐 女士 (电子商务) |
 |
| 电 话：0755-83208119-815 |
|
| 手 机：13528404270 |
|
 |
|
 |
|
 |
|
| 供应微盟移动电源锂电池充电IC ME4056SPG |
ME4056 is a complete constant-current/constant voltage linear charger for single cell lithium-ion batteries. With a
thermally enhanced 8-PIN SOP package on the bottom and low external component count make the ME4056
ideally suited for portable applications. Furthermore the ME4056 is specifically designed to work within USB power
specifications.No external sense resistor is needed and no blocking diode is required due to the internal PMOSFET
architecture .Thermal feedback regulates the charge current to limit the die temperature during high power
operation or high ambient temperature .The charge voltage is fixed at 4.2V,and the charge current can be programmed
externally with a single resistor. The ME4056 automatically terminates the charge cycle when the charge current drops
to 1/10th the programmed value after the final float voltage s reached.
When the input supply (wall adapter or USB supply) isemoved the ME4056 automatically enters a low current
state dropping the battery drain current to less than μA.The ME4056 can be put into shutdown mode reducing the supply current to 55μA.
Other features include Battery temperature monitor,under-voltage lockout, automatic recharge and two statuspins to indicate charge and charge termination.
Applications
Typical charge cycle（1000mAh battery）
●Cellular Telephones
●Digital Still Cameras
●MP3 Players
●Bluetooth Applications
●Portable Devices
●USB Bus-Powered Chargers
Features
Typical charge cycle（1000mAh battery）
●Protection of battery cell reverse connection
● Programmable charge current up to 1A
●No MOSFET sense resistor or blocking diode
required
●Complete linear Charger in SOP8 Package for
single Cell Lithium-Ion Batteries.
●Constant-Current/Constant-Voltage operation
with thermal regulation to maximize Rate
Without risk of overheating.
● Preset 4.2V charge voltage with ±1% accuracy
● Automatic Recharge
● Two Status Indication for Charge status, no
battery and battery failure indicators
● C/10 charge termination
● 55μA supply current in shutdown
● 2.9V trickle current charge threshold
● Soft-Start limits inrush current
● Battery Temperature Sensing
● Available in SOP8-PP package |
 |
| |
| 深圳市飙发科技有限公司 |
|
| 电 话： |
0755-83208119-815 |
| 传 真： |
0755-83255336 |
| 移动电话： |
13528404270 |
| 在线联系： |
|
| 公司地址： |
中国广东深圳市福田区福华路151号公汽大厦719 |
| 邮 编： |
|
| 公司主页： |
http://biaofakj.qy6.com( 加入收藏) |
|
|
|
 |
|
|
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。